4901 Kesslersville Road Easton, PA 18040
VG828 will produce a single AGS™ cut groove. The VG828 is designed to be driven by the Power Mule II. Drive Requirements: External drive, min. 1½ h...
Three-piece hole cutting tool designed to cut holes up to 4½"| DN90 in diameter for Mechanical-T, Vic-Let, and Vic-O-Well outlets. Base unit clamps...
Designed for manual or power cut grooving. Supplied with a ratchet handle for manual operation. Drive Requirements: Manual or external drive, min. ...
Hole cutting tool including Style 931 Vic-Tap II Mechanical-T unit for tapping into steel pipe systems under pressure up to 500 psi | 3447 kPa | 34...
Mobile light-duty roll grooving tool with an integral motor/drive unit mounted to portable hand truck. Reduces pipe handling by allowing the tool t...
Tool is manually operated using the supplied crank. Enhanced tracking rolls allow bi-directional grooving. Power Requirements: None
Tool head mounts to any tripod stand with a Ridgid® 300 bolt pattern or the flat bed of a work truck. Hydraulic hand pump can be mounted on either ...
Tool is operated using a standard 3 - 8"| 9.5 mm square ratchet drive (not included). Drive Requirements: Mounts to Victaulic® VPD752 or Ridgid® 30...
Kit for connecting a VE226 roll grooving tool to a Ridgid® 700 Power Drive. Weight: 75 lbs. | 34 kg
