4901 Kesslersville Road Easton, PA 18040
Go/No-Go pocket-sized steel tapes for taking circumferential measurements, marked in 1/100ths of an inch increments. Go/No-Go side can be used to c...
Designed for supporting pipe to be roll-grooved. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting ...
Turn-key, fab-shop solution. Maximize productivity gains associated with Victaulic® grooved systems. Includes hydraulic adjustable pipe stand and t...
Designed specifically for supporting pipe to be roll grooved. Self-standing, heavy duty unit permits free pipe rotation and traversing on ball tran...
Designed specifically for supporting pipe to be roll-grooved. Self-standing, heavy-duty unit permits free pipe rotation and traversing on ball tran...
Lightweight and portable pipe cut-off tool handles 4 - 24"| DN100 - DN600 pipe, up to 0.5"| 12.7 mm thick. Worm gear drive crank handle provides sm...
Rotation is powered by a small 120 VAC motor with SCR remote control. Unique distributor design has stainless steel insert which extends tip life, ...
One piece hole cutting tool designed to cut holes up to 2 3/4"| DN70 carbon and stainless steel pipe with OD up to 8" | DN200. Allows for use of Me...
Go/No-Go pocket-sized cable for taking circumferential measurements of copper tubing. GDC-CTS cable should only be used to check roll-grooved tubin...
